CONTENTS OF PITA-532 BUCKLE PNEUMATIC STEEL STRAPPING MACHINE USER MANUAL AND SPARE PARTS LIST PITA-532 TECHNICAL INFORMATION * Take all necessary safety measures and wear your equipment without operating the machine. * Perform the assembly and installation procedures as described in the manual. * Do not use the machine unless you have been trained on the PITA-532. * It is important to follow all instructions. Failure to comply can result in injuries and damage to packages. * Check your machine regularly every day. If there are damaged and worn parts, have them replaced by a trained or authorized service. Make sure that original spare parts are used. * Do not change the parts or parts of the machine. * Before operating the machine, make sure that there is no limb or part between the hoop and the product. * Never use the hoops as a carrier after packaging. * Keep the working environment tidy and use the machine in a balanced and safe manner. * Use steel circle in accordance with TS EN 13246 and TS 13247 Standard. * Use buckle in accordance with TS 11980 standard. * After clamping and cutting, do not remove the tip from the machine without holding the hoop. The circle can stretch and damage you or those around you. * If there are sharp corners on the packages, use plastic or cardboard corners between the corners and the material. * Do not use the hoop and buckle that are sure that the correct hoop and buckle are selected for the product and are not sure of its accuracy. * There is no substance harmful to human health on the machine. It is suitable for recycling.
